귀하의 위치에 대한 콘텐츠를 보려면 다른 국가 또는 지역을 선택하십시오.
United States
02:42:00 GMT+0000 (Coordinated Universal Time)
6006-C-2Z-C3>V
Deep groove ball bearing
Deep groove ball bearing 60..-C-2Z, single row, Generation C, shields, steel sheet metal cage
제품 정보
미터법
우수한
Main Dimensions & Performance Data
d | 30 mm | Bore diameter |
D | 55 mm | Outside diameter |
B | 13 mm | Width |
Cr | 14,500 N | Basic dynamic load rating, radial |
C0r | 8,300 N | Basic static load rating, radial |
Cur | 500 N | Fatigue load limit, radial |
nG | 17,100 1/min | Limiting speed |
nϑr | 13,800 1/min | Reference speed |
≈m | 0.113 kg | 중량 |
Mounting dimensions
da min | 34.6 mm | Minimum diameter shaft shoulder |
Da max | 50.4 mm | Maximum diameter of housing shoulder |
ra max | 1 mm | Maximum fillet radius |
Dimensions
rmin | 1 mm | Minimum chamfer dimension |
D1 | 48 mm | Shoulder diameter outer ring |
D2 | 50.22 mm | Caliber diameter outer ring |
d1 | 38 mm | Shoulder diameter inner ring |
d2 | 36.67 mm | Caliber diameter inner ring |
Temperature range
Tmin | -20 °C | Operating temperature min. |
Tmax | 120 °C | Operating temperature max. |
Calculation factors
f0 | 14.8 | Calculation factor |
다운로드:
현 제품 규격
Version code | >V | Not marked on bearing |
Changed internal design | C | GenerationC |
Sealing | 2Z | Non-contact shield on both sides |
Cage | JN | Steel sheet metal |
Tolerance class | P6 | Class6 (P6), better than PN |
Dimensional / heat stabilization | SN | Rings dimensional stabilized up to 120° |
Lubricant | GA14 | Ball bearing grease, low noise, standard for D<=62mm |
Radial internal clearance | C3 (Group 3) | Internal clearance larger than CN |
Bore type | Z | Cylindrical |
특징